Carcasing Basin
Rational installation of carcasses
Depending on the size of the basin, certain installation rules shall be followed:
- Preparation of the surface on which the basin will be installed. The basin area shall be horizontal (without slopes) and flat (without pits and bulbs). See Figure. No. 1.
- The base shall be placed on a solid surface: concrete base, wooden saturation or clottoire. Plant permitted on the ground or sand, but provided that the basin ' s staircases become solid, " flooded " to one level with the bottom of the pool (e.g. trotuary stove). See Figure No2.
- The collection of the basin itself shall be strictly in accordance with the guidance provided in the instruction.
- At the initial stage of filling the basin, the water should be calibrated from the centre to the boards in order to prevent storage. When the pool is filled by 20 per cent, it's necessary to fix the bars according to your pool.
- Once the pool has adopted its form, additional equipment and accessories may be connected and installed.
- It should be borne in mind that rectangular basins take their natural form in 100 per cent of filling water and after a time (2-3 days).
