The street basins have long evolved from an inexplicable dream to a well-accessible habitat for many Russians. Most popularly, advanced pools of composite materials -- efficient, practical, durable and simple in mounting -- have recently been acquired. The construction of a traditional concrete option could last many weeks and the cost of building it would increase in geometric progress.

Builds Composite materials consist of the installation of a pool cup already ready and its sand. A boiler corresponding to its size shall be provided for the installation of the cup. The depth of it depends on how much you want to deepen the cup into the ground. On the bottom of the boiler, they pour and ombie a sand pillow that serves as a base for the pool. It shall be fitted with a cup with the technology holes in it for the installation of special equipment. equipment Lights, hydromassiers, etc.

Composite basin installation has one nuance - it is made with simultaneous filling of the pool with water. At the same time, the closure between the wall of the boiler and the cup must be pre-empted by approximately 10 to 30 cm. The cup is filled very slowly, especially in hot summer days, where there is a risk of deformation of the material from which it is manufactured as a result of temperature changes. Water levels in the basin should not be increased by more than 10 cm per hour. Equipment that will serve the pool can be located in a special room 10 to 15 metres away from the water. Once the Foot has been completed, the area around the basin shall be started. So that a man who's bored in a house water tank, leaving it, doesn't slip, the area around the pool is better to get a rubber stick. It'll get the buyers out of the unfortunate accident.